SC6004 >90D Ultra-Hard Transparent Epoxy — Two-Component, Abrasion-Resistant, Flowable Optical Seal
>90D ultra-hard transparent. High mechanical strength, abrasion/scratch/impact resistant, long open time. Also available: PU transparent 80D anti-yellowing variant.
Optical components, sensors and applications demanding specific clarity and hardness — sealing, filling and protection.
- Shore Hardness
- >90 Shore D
- Temperature Range
- −20 °C–120 °C
- Cure Condition
- 80 °C / 60 min
- Viscosity @ 25 °C
- 1200 mPa·s
SCITEO Rigorous Standards: Qualified under GJB 150 environmental reliability testing by Zhenhua, CETC, and CAC, delivering mission-critical reliability.
Engineered as high-reliability domestic qualified alternatives for semiconductor and defense manufacturing clusters across Shanghai Zhangjiang, Xi'an, Chengdu, and Wuxi.
Specifications Don't Match Your Operating Conditions?
Only the baseline series is shown here. SCITEO's undisclosed archive holds formulations engineered for extreme environments. Contact us — our application engineers will match you precisely.
High Reliability Scenarios
Core positioning and partial application demonstration of this product under complex operating conditions.
Glass-Like Encapsulation
Liquid-State Demonstration
Optical Component Protection
Application Engineer FAQ
A structured brief from SCITEO covering physical properties, application standards, and related specifications.
Can two-component cure at room temp?
Yes, but full cure and ultra-hardness are different goals. Ambient cure takes far longer to approach 90D and is highly environment-dependent; heat cure is required where hardness is critical.
Can I add filler or tint?
SC6004 is a transparent system; SCITEO supplies pre-dispersed colorants and custom filler packages, with ratio and dispersion validated in-house to prevent cure anomalies and batch variation.
Request Technical Documentation or Consult an Application Engineer
Receive product documentation and customized formulations. Please provide accurate information for verification.
Recommended Advanced Materials
Explore more proven SCITEO solutions for other critical application environments to close the loop on microelectronics safety.
SC6002 280 °C Potting Epoxy — 2.5 W Thermal, Low-CTE, Insulating, 30 MPa, Two-Component
Low-viscosity self-leveling, 280 °C, 30 MPa bond, 2.5 W/m·K, HB flame-retardant insulating. Low CTE compatible with varied substrates. 1000 thermal cycles (−40 to 125 °C): 88% shear retention; damp-heat 1000 h (85 °C / 85% RH): 80% shear retention.
SC3960 −70 °C Cryogenic Epoxy — Thermal, High/Low-Temp Cycling, 96D Ultra-Hard, Potting & Bonding
SC3960 cryogenic epoxy. −70 °C no cracking, Mil-Std pass. 180 °C high-temp, 1.5 W/m·K thermal. 96D hardness: 200 MPa compressive, 120 MPa flexural. Bonds military & automotive-grade parts. 1000 thermal cycles (−40 to 125 °C): 96% shear retention.
SC6630 300 °C Transparent Epoxy — Single-Component, High-Strength, Insulating, Rigid Bonding & Sealing
Transparent single-component, ready-to-use. Heat-cure for high bond strength, insulating, 300 °C, multi-reflow resistant. Dispensable & printable. 95% shear retention after 1500 h at 190 °C; 500 thermal cycles (−40 to 125 °C): 80% shear retention; damp-heat 1000 h (85 °C / 85% RH): 72% shear retention.